Washer Fluid-Level Sensor Inspection
WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION (US) .)
- Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION (US) .)
- Verify that the continuity between the washer fluid-level sensor terminals is as indicated in the table.
- If not as indicated in the table, replace the washer fluid-level sensor. (See WASHER FLUID-LEVEL SENSOR REMOVAL/INSTALLATION .)