LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2021 >> CX-5 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (On-Board Diagnostic - Adaptive Front Lighting System Control Module) >> DTC U0423-68; Error Signal Received From Instrument Cluster >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC U0423-68; Error Signal Received From Instrument Cluster: Notes

WARNING: This page is about a different car, the 2017 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
DETECTION CONDITION & POSSIBLE CAUSE

Description Error signal received from instrument cluster
  • Ignition switch error signal
  • Selector lever position (R position) (ATX)/reverse (MTX) signal error
  • Selector lever position (R position) (ATX)/reverse (MTX) signal not determined
Detection condition
  • Ignition switch error signal
    • The adaptive front lighting system (AFS) control module received ignition switch error signal for 5 s or more with the ignition switched ON (engine off or on).
  • Selector lever position (R position) (ATX)/reverse (MTX) signal error
    • The adaptive front lighting system (AFS) control module received selector lever position (R position) (ATX)/reverse (MTX) signal error for 5 s or more with the ignition switched ON (engine off or on).
  • Selector lever position (R position) (ATX)/reverse (MTX) signal not determined
    • The adaptive front lighting system (AFS) control module detected undetermined selector lever position (R position) (ATX)/reverse (MTX) signal for 5 s or more.
Fail-safe
  • Ignition switch error signal
    • Control of the adaptive front lighting system (AFS) is continued with the ignition switched ON (engine on).
      • Control of the headlight auto leveling system is continued.
  • Selector lever position (R position) (ATX)/reverse (MTX) signal error
    • The swivel actuator is moved to the center.
      • Control of the headlight auto leveling system is continued.
  • Selector lever position (R position) (ATX)/reverse (MTX) signal not determined
    • Control of the swivel actuator is continued with the transmission range switch (ATX)/back-up light switch (MTX) fixed in the condition when the malfunction is determined.
      • Control of the headlight auto leveling system is continued.
Possible cause
  • DTCs are stored in the instrument cluster.
  • Instrument cluster malfunction
  • Adaptive front lighting system (AFS) control module malfunction
System wiring diagram Not applicable