No. 5 Additional Remote Transmitter Programming Procedure (If There Is No Remote Transmitter Available That Can Start Engine) (Using M-MDS): Notes
WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- The engine cannot be started if any step or procedure is skipped. Perform all procedures in the order of the steps.
- Because it is necessary to program two or more remote transmitters to the immobilizer system-related parts to start the engine, perform the programming of two or more remote transmitters.
NOTE:
- Perform the DTC inspection for the start stop unit using the M-MDS.
Vehicle condition
- Have two remote transmitters to be programmed.