Selection Of Procedure For Immobilizer System-Related Parts Programming
WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
- Verify that the ROOM fuse, AT fuse, and SRS2/ESCL fuse are installed.
- Select the applicable programming procedure from the service content of the immobilizer system-related parts.
Immobilizer System-Related Parts Service and Programming Procedure Chart
| No. | Service | Programming procedure | |
|---|---|---|---|
| 1 | Additional remote transmitter programming | Have remote transmitter that can start engine | (See NO. 1 ADDITIONAL REMOTE TRANSMITTER PROGRAMMING PROCEDURE (USING THE M-MDS) .) |
| 2 | Programming due to PCM replacement | (See NO. 2 PROGRAMMING PROCEDURE AFTER PCM REPLACEMENT .) | |
| 3 | Start stop unit replacement and programming due to simultaneous replacement of start stop unit/PCM | (See NO. 3 START STOP UNIT REPLACEMENT AND PROGRAMMING PROCEDURE DUE TO SIMULTANEOUS REPLACEMENT OF START STOP UNIT/PCM .) | |
| 4 | Remote transmitter replacement or clearing | (See NO. 4 REMOTE TRANSMITTER REPLACEMENT OR REMOTE TRANSMITTER CLEARING .) | |
| 5 | Additional remote transmitter programming | There is no remote transmitter available that can start engine | (See NO. 5 ADDITIONAL REMOTE TRANSMITTER PROGRAMMING PROCEDURE (IF THERE IS NO REMOTE TRANSMITTER AVAILABLE THAT CAN START ENGINE) (USING M-MDS) .) |