Auto light system (Using M-MDS)

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

Connect the M-MDS to DLC-2.
After the vehicle is identified, select the following items from the initial screen of the M-MDS.
- Select the "Module Programming".
- Select "Programmable Parameters".
- Select menu in the R_BCM.

Select an item name, and then select option.

M-MDS display	Function	Initial setting	Setting contents	Control unit
Auto-headlight On.	Auto light sensor sensitivity can be changed.	Medium	Dark/Medium Dark/Medium/Medium Light/Light	Rear body control module (RBCM)