Turn light system (Using M-MDS)
WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the M-MDS to DLC-2.
- After the vehicle is identified, select the following items from the initial screen of the M-MDS.
- Select the "Module Programming".
- Select "Programmable Parameters".
- Select menu in the R_BCM.
- Select an item name, and then select option.
M-MDS display Function Initial setting Setting contents Control unit Three-Flash Turn Signal. The turn light system can be switched between operable and inoperable. ON OFF/ON Rear body control module (RBCM)