Washer Fluid-Level Sensor Inspection

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .)
Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION .)
Inspect for continuity according to washer fluid level between the washer fluid-level sensor terminals.

Fig 1: Inspecting Continuity Between Washer Fluid-Level Sensor Terminals

Courtesy of MAZDA MOTORS CORP.

Fig 2: Washer Fluid-Level Sensor Terminals Continuity Chart

Courtesy of MAZDA MOTORS CORP.

If not as indicated in the chart, replace the washer fluid-level sensor. (See WASHER FLUID-LEVEL SENSOR REMOVAL/INSTALLATION .)