DTC B00A0:28 [SAS Control Module (Two-Step Deployment Control System - Us/CANADA Spec.)]: Notes
WARNING: This page is about a different car, the 2017 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
DTC B00A0:28 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM - US/CANADA SPEC.)] - DETECTION CONDITION & POSSIBLE CAUSE
| System malfunction location |
- Occupant classification sensor calibration check error
|
| Detection condition |
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- Calibration set value not within valid range.
|
| Fail-safe |
- |
| Possible cause |
- Occupant classification sensor deformed or malfunction
- Object placed on front passenger-side seat during calibration of occupant classification sensor
- Improperly installed front passenger-side seat part at time of calibration
- Deformed floor where attached to front passenger-side seat
- Front seat warmer malfunction
- Power seat malfunction
- Seat cushion is damp
- Occupant classification sensor malfunction
- SAS control module malfunction
|
| System wiring diagram |
- |