DTC B00A0:81/B00A0:87 [SAS Control Module (Two-Step Deployment Control System - Us/CANADA Spec.)]: Notes

WARNING: This page is about a different car, the 2017 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

DTC B00A0:81/B00A0:87 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM - US/CANADA SPEC.)] - DETECTION CONDITION & POSSIBLE CAUSE

System malfunction location	B00A0:81:Occupant classification sensor memory check sum error B00A0:87:Signal reception error from occupant classification sensor
Detection condition	WARNING: Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure. Error signal is detected between SAS control module and occupant classification sensor The SAS control module could not receive CAN signal from the occupant classification sensor for 1 s or more.
Fail-safe	Not applicable
Possible cause	Malfunction in CAN line between the SAS control module and occupant classification sensor
System wiring diagram	Not applicable