Diagnostic Procedure
WARNING: This page is about a different car, the 2017 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
DTC B00D5:29 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM - US/CANADA SPEC.)] - DIAGNOSTIC PROCEDURE
| Step | Inspection | Action | |
|---|---|---|---|
| 1 | PERFORM INSTRUMENT CLUSTER DTC INSPECTION
|
Yes | Perform the applicable DTC inspection. (See DTC TABLE [INSTRUMENT CLUSTER] .) |
| No | Go to the next step. | ||
| 2 | INSPECT INDICATOR UNIT CONNECTOR
|
Yes | Replace the malfunctioning part, then go to Step 4. |
| No | Go to the next step. | ||
| 3 | INSPECT INDICATOR UNIT
|
Yes | Replace the indicator unit. (See INDICATOR UNIT REMOVAL/INSTALLATION
.) Go to the next step. |
| No | Go to the next step. | ||
| 4 | PERFORM SAS CONTROL MODULE DTC INSPECTION
|
Yes | Repeat the inspection from Step 1.
|
| No | DTC troubleshooting completed. | ||