Snapshot data

The snapshot data stores the currently detected DTC data.
The recording timing for the freeze frame data/snapshot data differs depending on the number of DTC drive cycles.
- For a DTC with a drive cycle number 1, only the malfunction determination data is recorded.
- For a DTC with a drive cycle number 2, both the malfunction determination and undetermined data is recorded.
NOTE:
- Refer to the PID monitor table to confirm the engine control system operation status when the PCM does not store a DTC. (See PCM INSPECTION [SKYACTIV-G 2.5T] .)
- Freeze frame data items are not displayed according to detected DTC.