Preparation before servicing
- Verify initial learning implementation necessity for replacement parts.REPLACEMENT PART DESCRIPTION
Replacement part Initial learning implementation necessity Control valve body replacement Necessary Oil pressure switch replacement Necessary Clutches (1) Necessary Automatic transaxle replacement Necessary ON/OFF solenoid replacement Unnecessary Coupler component replacement Unnecessary (1) Low clutch, high clutch, R-3-5 brake, 2-6 brake, and low and reverse brake - Apply the parking brake firmly, and set the wheel blocks for both the front and rear wheels.
- Inspect the ATF level. (See AUTOMATIC TRANSAXLE FLUID (ATF) INSPECTION .)
- Start the engine.
- Warm-up the engine and allow the ATF temperature to reach 60-110°C {140-230°F}.