LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2021 >> MX-5 Miata Club, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Power Systems) >> Main Fuse Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Main Fuse Removal/Installation

WARNING: This page is about a different car, the 2016 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Widen the main fuse cover in the direction of arrows (1) shown in the figure to detach the tabs of the main fuse cover from the main fuse, then lift up the main fuse cover in the direction of arrow (2).
    Fig 1: Lifting Up Main Fuse Cover
    G10955053Courtesy of MAZDA MOTORS CORP.
  3. Press the hook of the main fuse cover in the direction of arrow (3) in the figure to detach the hook of the main fuse cover from the main fuse, then remove the main fuse cover in the direction of arrow (4).
  4. Remove the nuts.
    Fig 2: Pressing Main Fuse Cover Hook
    G10955054Courtesy of MAZDA MOTORS CORP.
  5. Remove the wiring harness.
  6. Remove the main fuse.
  7. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals