LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2022 >> 3 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Manual Transaxle Shift Mechanism) >> Control Cable Removal/Installation >> Control Cable Ends (Transaxle Side) Installation Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Control Cable Ends (Transaxle Side) Installation Note

WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that the shift control module is in the neutral position.
    CAUTION:
    • Pull the lock pin within the range shown in the figure. If the lock pin is pulled excessively, it could deform and no longer function.
    G13176465Courtesy of MAZDA MOTORS CORP.
  2. Install the lock pin to the groove of the control cable end.
    G13176466Courtesy of MAZDA MOTORS CORP.
  3. Connect the control cable end to the manual transaxle.
scientia non olet · About LEMON Manuals