DTC B14F0-55: Body Control Module (BCM) Configuration Not Performed [Vehicle Control Module]: Outline
WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
DTC B14F0:55 [VEHICLE CONTROL MODULE] DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Body control module (BCM) configuration not performed |
| Detection condition |
- The vehicle control module (VCM) detects that the forward sensing camera (FSC) received a signal which indicates the body control module (BCM) configuration was not performed for 10 s.
|
| Fail-safe |
(See DTC TABLE [VEHICLE CONTROL MODULE (US)]
.) |
| Possible cause |
- Malfunction in CAN communication line between body control module (BCM) and forward sensing camera (FSC)
- Inappropriate forward sensing camera (FSC) replacement procedure
- Configuration data of body control module (BCM) and forward sensing camera (FSC) is not matched
- Body control module (BCM) configuration data write error
- Configuration not completed after forward sensing camera (FSC) replacement
- Forward sensing camera (FSC) malfunction
- Body control module (BCM) malfunction
|
| System wiring diagram |
Not applicable |
| Connector diagram |
Not applicable |