LF Control Unit Inspection [(Us)]: Notes

Disconnect the negative battery terminal.
(See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)] .)
Remove the front side trim.
(See LF CONTROL UNIT REMOVAL/INSTALLATION [(US)] .)
Connect the negative battery terminal.
(See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)] .)
Verify that the voltages of each of the terminals are as indicated in the terminal voltage table (See Terminal voltage table (reference) .)
- If the voltage is not as specified in the terminal voltage table (See Terminal voltage table (reference) .), inspect the parts under Inspection item(s).
  - If the system does not work normally even though the inspection items are normal, replace the LF control unit.