DTC U2300-54: Error Configuration Data Received From Instrument Cluster [Auto Leveling Control Module]: Notes
WARNING: This page is about a different car, the 2021 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
DTC U2300:54 (AUTO LEVELING CONTROL MODULE) DETECTION CONDITION AND POSSIBLE CAUSE
| Description |
Error configuration data received from instrument cluster |
| Detection condition |
- After 30 s or more have elapsed with the ignition switched ON (engine on or off), the auto leveling control module received error configuration data from the instrument cluster.
|
| Fail-safe |
- Control of the headlight auto leveling system is continued.
|
| Possible cause |
NOTE:
- To correctly write the configuration data sent from the instrument cluster to the auto leveling control module to the auto leveling control module, 30 s or more need to have elapsed since the ignition was switched ON (engine off or on).
- DTCs are stored in the instrument cluster.
- Instrument cluster configuration not implemented
- Instrument cluster internal memory malfunction
- Instrument cluster configuration data error
- Auto leveling control module malfunction
|
| System wiring diagram |
Not applicable |