DTC U2300-55: Instrument Cluster Configuration Not Implemented [Power Liftgate (PLG) Control Module]: Notes
DTC U2300:55 [POWER LIFTGATE (PLG) CONTROL MODULE] DETECTION CONDITION AND POSSIBLE CAUSE
| Description |
Instrument cluster configuration not implemented |
| Detection condition |
- The power liftgate (PLG) control module received a signal which indicates the instrument cluster configuration is not performed.
|
| Fail-safe |
- Stops the power liftgate (PLG) system operation.
|
| Possible cause |
NOTE:
- To correctly write the configuration data sent from the instrument cluster to the power liftgate (PLG) control module to the power liftgate (PLG) control module, 30 s or more need to have elapsed since the ignition was switched ON (engine off or on).
- Instrument cluster configuration is not completed.
- Instrument cluster malfunction
- Power liftgate (PLG) control module malfunction
|
| System wiring diagram |
Not applicable |