PID/Data Monitor Table [Adaptive Led Headlights Control Module]

PID/DATA MONITOR DESCRIPTION (ADAPTIVE LED HEADLIGHTS CONTROL MODULE)

PID	Unit/Operation	Data contents	Module control terminal
ACC_SEN_TEMP	°C	Displays acceleration sensor temperature.	-
ACC_SEN_TEMP_INIT	°C	Displays acceleration sensor temperature when adaptive LED headlights control module is initialized.	-
ACC_X	mG	Displays current acceleration value (X-axis).	-
ACC_X_INIT	mG	Displays acceleration value (X-axis) when adaptive LED headlights control module is initialized.	-
ACC_Y	mG	Displays current acceleration value (Y-axis).	-
ACC_Y_INIT	mG	Displays acceleration value (Y-axis) when adaptive LED headlights control module is initialized.	-
ACC_Z	mG	Displays current acceleration value (Z-axis).	-
ACC_Z_INIT	mG	Displays acceleration value (X-axis) when adaptive LED headlights control module is initialized.	-
H/L_STAT	OFF/DRL ON/TNS ON/Headlight Lo ON/Headlight Hi ON	OFF: Headlights are not illuminated. DRL ON: Daytime running light (DRL) is illuminated. TNS ON: Parking light is illuminated. Headlight Lo ON: Headlight LO are illuminated. Headlight Hi ON: Headlight HI are illuminated.	J, I
HORZ_STAT	Not horizontally/horizontally	Displays status of horizontal.	-
LVL_TGT_ANG	° (deg)	Displays target angle of leveling control.	E
PITCH	° (deg)	Displays calculated pitch angle.	-
REV_LAMP_STAT	Off/On	Off: Back-up lights are not illuminated. On: Back-up lights are illuminated.	J, I
STR_ANG	° (deg)	Displays steering angle signal (absolute angle). Steering wheel in neutral position: Near 0 degrees Steering wheel turned to left: Changes from 0 degrees to positive Steering wheel turned to right: Changes from 0 degrees to negative	J, I
VPWR	V	Displays adaptive LED headlights control module power supply voltage.	C
VSS	km/h	Vehicle speed is displayed.	J, I