LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2023 >> 3 Select, 4D Hatchback >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> On-Board Diagnostic - 360DEGREES View Monitor Control Module >> DTC U3000-04: 360°View Monitor Control Module Internal Malfunction >> Diagnostic Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Procedure

DTC U3000:04 (360°VIEW MONITOR CONTROL MODULE) DIAGNOSTIC PROCEDURE

Step Inspection Results Action
1 INSPECT FOR OTHER RELATED DTCs 
  • Perform the DTC inspection for the 360°view monitor control module. (See DTC INSPECTION .)
  • Are any of the following DTCs displayed?
    • B12BD:01
    • B12BD:02
    • B12C0:01
    • B12C0:02
    • B12C1:01
    • B12C1:02
    • B148E:01
    • 148E:02
 Yes Repair the malfunctioning location according to the applicable DTC troubleshooting.
See DTC B12BD:01 [360°VIEW MONITOR CONTROL MODULE] .)
(See DTC B12BD:02 [360°VIEW MONITOR CONTROL MODULE] .)
(See DTC B12C0:01 [360°VIEW MONITOR CONTROL MODULE] .)
(See DTC B12C0:02 [360°VIEW MONITOR CONTROL MODULE] .)
(See DTC B12C1:01 [360°VIEW MONITOR CONTROL MODULE] .)
(See DTC B12C1:02 [360°VIEW MONITOR CONTROL MODULE] .)
(See DTC B148E:01 [360°VIEW MONITOR CONTROL MODULE] .)
(See DTC B148E:02 [360°VIEW MONITOR CONTROL MODULE] .)
No Go to the next step.
2 INSPECT 360°VIEW MONITOR CONTROL MODULE FOR MALFUNCTION 
  • Clear the DTC recorded in the memory. (See CLEARING DTC .)
  • Perform the DTC inspection for the 360°view monitor control module. (See DTC INSPECTION .)
  • Is the same Pending DTC present?
 Yes Refer to the CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW to inspect for a CAN communication error.
(See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(US)] .)
If the CAN communication is normal, replace the 360°view monitor control module and perform the repair completion verification.
(See 360° VIEW MONITOR CONTROL MODULE REMOVAL/INSTALLATION [(US)] .)
No Go to the next step.
Repair completion verification VERIFY IF OTHER DTC IS DISPLAYED 
  • Perform the DTC inspection. (See DTC INSPECTION .)
  • Are any other DTCs displayed?
 Yes Repair the malfunctioning location according to the applicable DTC troubleshooting.
No DTC troubleshooting completed.
scientia non olet · About LEMON Manuals