Boost Pressure Sensor Removal/Installation
WARNING: This page is about a different variant/trim than selected.
- Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)] .)
- Remove the air hose. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION .)
- Remove in the order indicated in the table.
- Install in the reverse order of removal.
Courtesy of MAZDA MOTORS CORP.
BOOST PRESSURE SENSOR COMPONENT OPERATIONSComponent No. Refer to 1 Boost pressure sensor connector 2 Hose 3 Boost pressure sensor