LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2023 >> CX-50 S Select >> Repair and Diagnosis >> Steering >> Steering Control Systems >> Electric Power Steering System >> Steering Wheel And Column Removal/Installation >> Steering Column Component Removal Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Column Component Removal Note

CAUTION:
  • Always lock the adjuster lever. Otherwise, the steering column component could be damaged. In addition, do not release the lock of the adjuster lever until the steering column component installation is completed.
  • When removing the steering column component, follow the procedure. Otherwise, it could damage the intermediate shaft.
  1. Lock the adjuster lever.
    G13558974Courtesy of MAZDA MOTORS CORP.
  2. Place alignment marks on the steering gear (pinion) and intermediate shaft as shown in the figure below.
    G13177086Courtesy of MAZDA MOTORS CORP.
  3. Remove the joint bolt.
  4. Disconnect the intermediate shaft from the steering gear (pinion).
  5. Remove the nuts, then remove the steering column component from the dashboard member.
scientia non olet · About LEMON Manuals