LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2024 >> 3 Premium >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System (VIN M) >> Fuel Injector Removal/Installation >> Fuel Distributor Installation Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Distributor Installation Note

  1. Install the fuel distributor to the fuel injectors while aligning the projection of the spacer to the notch of the fuel distributor.
    G09074971Courtesy of GENERAL MOTORS COMPANY
  2. Temporarily tighten the fuel distributor installation bolts until their heads contact the fuel distributors.
  3. Turn the fuel distributor installation bolts a half a turn in the order shown in the figure below.
    Fig 1: Fuel Distributor Installation Bolts Tightening Sequence
    G09074972Courtesy of GENERAL MOTORS COMPANY
  4. Turn the fuel distributor installation bolts another half a turn in the order shown in the figure below (one turn including the half turn in Step 3).
  5. Tighten the fuel distributor installation bolts in the order shown in the figure below.
  6. Install the high pressure fuel pipe. (See HIGH PRESSURE FUEL PUMP REMOVAL/INSTALLATION [SKYACTIV-G (WITH CYLINDER DEACTIVATION)] .)
scientia non olet · About LEMON Manuals