LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2024 >> 3 S >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belts >> Buckle Switch Inspection >> MEXICO Spec >> Front
April 5, 2026: LEMON Manuals is launched! Read the announcement.

MEXICO Spec: Front

  1. Switch the ignition off.
  2. Disconnect the negative battery terminal and wait for 1 min or more. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  3. Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION .)
  4. Remove the front buckle. (See FRONT BUCKLE REMOVAL/INSTALLATION .)
  5. Inspect for continuity between the buckle switch terminals using a tester.
    G14582593Courtesy of MAZDA MOTORS CORP.
    • If not as indicated in the table, replace the front buckle.
G14582594Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals