Left/right selection switch
- Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
- Remove the power window main switch. (See POWER WINDOW MAIN SWITCH REMOVAL/INSTALLATION .)
- Verify that the resistance between power window main switch terminals J and P is as indicated in the table.
SWITCH POSITION AND TERMINAL RESISTANCE SPECIFICATION
| Switch Position | Resistance (ohm) | Terminal |
|---|---|---|
| Left | 0 | J-P |
| Right | 2090-2310 |
- If not as indicated in the table, replace the power window main switch. (See POWER WINDOW MAIN SWITCH REMOVAL/INSTALLATION .)