DTC C0061-96: Acceleration Sensor Malfunction [Adaptive Front Lighting System (AFS) Control Module]
WARNING: This page is about a different car, the 2024 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
C0061: 96 (ALH/AFS/ALV) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Acceleration sensor malfunction |
| Detection condition |
- The auto leveling control module/adaptive front lighting system (AFS) control module/adaptive LED headlights control module cannot receive the signal from the acceleration sensor.
|
| Fail-safe |
- The headlight leveling actuator is stopped at the position when the malfunction is determined.
- Control of the adaptive LED headlights is continued. (with adaptive LED headlights)
- Control of highway mode is stopped. (with adaptive LED headlights)
|
| Possible cause |
- Auto leveling control module/adaptive front lighting system (AFS) control module/adaptive LED headlights control module malfunction (internal malfunction) (Refer to applicable ADAPTIVE FRONT LIGHTING SYSTEM (AFS) CONTROL MODULE REMOVAL/INSTALLATION
in the service information.)
|
| Repeatability verification procedure |
- Clear the DTC recorded in the memory. (see CLEARING DTC
.)
- Switch the ignition ON (engine off or on)/main power ON (READY off or on) and wait for 10 s or more.
|
| System wiring diagram |
|