DTC inspection
- Using the M-MDS, perform a DTC inspection and verify if any EPS control module-related DTCs are detected. (Refer to [DTC INSPECTION
] in the appropriate troubleshooting information
)
DTC is detected:
- If the detected DTCs are U3000:16, U3000:28, U3000:49, U3000:61, U3000:64, U3000:72, U3000:73, or U3000:96, replace the steering wheel and column. (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION [WITH ELECTRIC TILT TELESCOPIC UNIT] ). (See STEERING WHEEL AND COLUMN REMOVAL [WITHOUT ELECTRIC TILT TELESCOPIC UNIT] ). (See STEERING WHEEL AND COLUMN INSTALLATION [WITHOUT ELECTRIC TILT TELESCOPIC UNIT] ).
- If the detected DTCs are other than U3000:16, U3000:28, U3000:49, U3000:61, U3000:64, U3000:72, U3000:73, or U3000:96, inspect the possible causes of the detected DTCs starting from the top. (Refer to [DTC TABLE [EPS]
] in the appropriate troubleshooting information
)
- If the malfunction is not resolved, replace the steering wheel and column. (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION [WITH ELECTRIC TILT TELESCOPIC UNIT] ). (See STEERING WHEEL AND COLUMN REMOVAL [WITHOUT ELECTRIC TILT TELESCOPIC UNIT] ). (See STEERING WHEEL AND COLUMN INSTALLATION [WITHOUT ELECTRIC TILT TELESCOPIC UNIT] ).
No DTC is detected
- Perform a visual inspection. (See VISUAL INSPECTION )