PID/Data Monitor Table

PID/DATA MONITOR (PLG)

PID	Unit/Operation	Data contents
BCM_ID_RGTR	Not Complete/Complete	Not Complete: Programming of remote transmitter ID data between body control module (BCM) and power liftgate (PLG) control module is not completed. Complete: Programming of remote transmitter ID data between body control module (BCM) and power liftgate (PLG) control module is completed.
CARGO_LAMP_SW	Off/On	Off: Room light switch is off. On: Room light switch is on.
CLAW_SW	Off/On	Off: Claw switch is off. On: Claw switch is on.
CLOSURE_MOTOR_CLOSE_STAT	Off/On	Off: Closure motor close is not operating. On: Closure motor close is operating.
CLOSURE_MOTOR_CLOSE_VOLT	V	Displays voltage during a close operation of the closure motor.
CLOSURE_MOTOR_CUR	A	Displays current during closure motor operation.
CLOSURE_MOTOR_OPEN_STAT	Off/On	Off: Closure motor open is not operating. On: Closure motor open is operating.
FMD_DISBLE_REQ	send operation request/inhibit operation request	Displays foot-motion detection operation request status.
HALF_LATCH_SW	Off/On	Off: Half latch switch is off. On: Half latch switch is on.
KICK_SEN_DETECT	no kick detected/kick detected/invalid	Displays foot-motion detection sensor detection status.
KICK_SEN_STAT	Off/On	Displays foot-motion detection sensor status.
PLG MOTOR CLOSE_STAT_L	Off/On	Off: Power liftgate (PLG) drive unit motor (LH) close is not operating. On: Power liftgate (PLG) drive unit motor (LH) close is operating.
PLG MOTOR CLOSE_VOLT_L	V	Displays voltage during a close operation of the power liftgate (PLG) drive unit motor (LH).
PLG_MOTOR_CLOSE_VOLT_R	V	Displays voltage during a close operation of the power liftgate (PLG) drive unit motor (RH).
PLG_MOTOR_CURL	A	Displays the current during power liftgate (PLG) drive unit motor (LH) operation.
PLG_MOTOR_OPEN_STAT_L	Off/On	Off: Power liftgate (PLG) drive unit motor (LH) open is not operating. On: Power liftgate (PLG) drive unit motor (LH) open is operating.
PLG_PULSE_COUNT_L	Count	Displays pulse count from the power liftgate (PLG) drive unit (LH)
PLG_SEN_A_L	Lo/Hi	Displays power liftgate (PLG) drive sensor A_L contact point status.
PLG_SEN_A_R	Lo/Hi	Displays power liftgate (PLG) drive sensor A_R contact point status.
PLG_SEN_B_L	Lo/Hi	Displays power liftgate (PLG) drive sensor B_L contact point status.
PLG_SEN_B_R	Lo/Hi	Displays power liftgate (PLG) drive sensor B_R contact point status.
PLG_STAT	Unknown/PLG Full Close/PLG Half Open/PLG Full Open/PLG AutoOpen/PLG AutoClose	Unknown: Liftgate operation condition is not determined. PLG Full Close: Liftgate is fully closed. PLG Half Open: Liftgate is partly open. PLG Full Open: Liftgate is fully open. PLG AutoOpen: Liftgate is during auto open operation. PLG AutoClose: Liftgate is during auto close operation.
RETURN_SW	Off/On	Off: Motor return switch is off. On: Motor return switch is on.
TOUCH_SEN_L	V	Displays voltage at the power liftgate (PLG) touch sensor (LH)
TOUCH_SEN_R	V	Displays voltage at the power liftgate (PLG) touch sensor (RH)
VPWR	V	Displays voltage at the power supply
VPWR_IG	V	Displays power supply voltage of power liftgate (PLG) control module
VPWR_POWER	V	Displays power supply voltage of power liftgate (PLG) control module
VPWR_SEN_SW	V	Displays power supply voltage of power liftgate (PLG) control module