DTC U2501-68: Error Signal Received From Vehicle Control Module (VCM)

U2501: 68 (DSC) DETECTION CONDITION AND POSSIBLE CAUSE

SYSTEM MALFUNCTION LOCATION	ERROR SIGNAL RECEIVED FROM VEHICLE CONTROL MODULE (VCM)
DETECTION CONDITION	THE ELECTRONICALLY CONTROLLED BRAKE UNIT/DSC HU/CM RECEIVES THE ERROR SIGNAL FROM THE VEHICLE CONTROL MODULE (VCM).
FAIL-SAFE	(SEE DTC TABLE: [DSC] ).
POSSIBLE CAUSE	DTCS ARE STORED IN THE VEHICLE CONTROL MODULE (VCM). (SEE DTC TABLE [VCM] .) BODY CONTROL MODULE (BCM) MALFUNCTION (VEHICLE CONTROL MODULE (VCM) MALFUNCTION) (REFER TO [BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION ] IN service information).
REPEATABILITY VERIFICATION PROCEDURE	CLEAR THE DTC RECORDED IN THE MEMORY. (SEE CLEARING DTC .)
SYSTEM WIRING DIAGRAM	NOT APPLICABLE