PID/Data Monitor Table
PID/DATA MONITOR (OBC)
| PID | Unit/Operation | Data contents |
|---|---|---|
| AC_CUR_SEN_FAULT | No_Error/Error | Displays the internal AC current sensor malfunction status. |
| AC_DC_CONV_EFFICIENCY | % | Displays the AC/DC conversion ratio. |
| AC_DC_CONV_FAULT | No_Error/Error | Displays the AC/DC conversion malfunction status. |
| AC_FREQUENCY_FAULT | No_Error/Error | Display the AC malfunction frequency. |
| AC_VOLT_SEN_FAULT | No_Error/Error | Displays the internal AC voltage sensor malfunction status. |
| ALRM_MODE | set/unset/active/ignore | Displays the alarm mode. |
| BULK_VOLT_HI_FAULT | No_Error/Error | Displays the bulk high voltage malfunction status. |
| BULK_VOLT_LO_FAULT | No_Error/Error | Displays the bulk low voltage malfunction status. |
| CAN_ERROR | No_Error/Error | Displays the CAN communication error status. |
| CHARGE_FAIL_STAT | GoodValue/FaultyValue | Displays the charging malfunction status. |
| CHARGE_POWER_AVAIL | kW | Displays the available charging power. |
| CHARGE_POWER_REQ | kW | Displays the charging power request amount. |
| CHARGE_REQ_WAKEUP | not/RequestWakeUp | Displays the charging request wake-up status. |
| CHARGE_STAT | OFF/ON | Displays the charge status. |
| CHARGER_AC_CUR | Arms | Displays the actual AC charging current amount. |
| CHARGER_AC_VOLT | Vrms | Displays the actual AC charging voltage amount. |
| CHARGER_DC_CUR | A | Displays the actual DC charging current amount. |
| CHARGER_DC_VOLT | V | Displays the actual DC charging voltage amount. |
| CHARGER_GP_COUNTER | Counts | Displays AC/DC charger group counter. |
| CHARGER_TEMP | C°, F° | Displays the internal charging temperature. |
| CHARGER_WAKEUP_ALLW | OFF/NO | Display the charging wake-up permit status. |
| COOL_REQ | not/Request Cooling | Display the cooling request status. |
| COUPLER_CONNECT_STAT | unconnect/connect | Displays the coupler connection status. |
| CTRL_PILOT_DUTY | % | Displays control pilot duty. |
| CTRL_PILOT_VOLT | V | Displays control pilot voltage. |
| DC_CUR_SEN_FAULT | No_Error/Error | Displays the internal DC current sensor malfunction status. |
| DC_VOLT_SEN_FAULT | No_Error/Error | Displays the internal DC voltage sensor malfunction status. |
| EVSE_STAT | A/B1/B2/C/D/E/F | Displays EVSE state. |
| HV_BATT_CHARGE_CUR_LIM | A | Displays the high voltage battery charging current limit. |
| HV_BATT_CHARGE_VOLT_LIM | V | Displays the high voltage battery charge voltage limit. |
| HV_BATT_CHG_EXT_GP_COUNT | Counts | Displays high voltage battery charge external group counter. |
| HV_BATT_CUR_EXT | A | Displays high voltage battery current external. |
| HV_BATT_HVIL_STAT | OK/Not OK | Displays high voltage battery HVIL status. |
| HV_BATT_VOLT_EXT | V | Displays high voltage battery voltage external. |
| HV_CHIP_FAULT | No_Error/Error | Displays the high voltage chip malfunction status. |
| HV_CHIP_OV_FAULT | No_Error/Error | Displays HV CHIP OV fault. |
| HV_LOC_WLV_FAULT | No_Error/Error | Displays HV LOC WLV fault. |
| HV_MICRO_OVERTEMP_FAULT | No_Error/Error | Displays HV micro over temperature. |
| HV_TEMP_SEN_FAULT | No_Error/Error | Displays the high voltage temperature sensor malfunction status. |
| HV_THERMAL_A_FAULT | No_Error/Error | Displays the high voltage temperature A malfunction status. |
| HV_THERMAL_B_FAULT | No_Error/Error | Displays the high voltage temperature B malfunction status. |
| HV_THERMAL_C_FAULT | No_Error/Error | Displays the high voltage temperature C malfunction status. |
| HV_THERMAL_D_FAULT | No_Error/Error | Displays the high voltage temperature D malfunction status. |
| HV_VOLT_HI_FAULT | No_Error/Error | Displays the high voltage battery HI malfunction status. |
| IAC_ERROR | No_Error/Error | Displays IAC fault. |
| LV_LOC_WLV_FAULT | No_Error/Error | Displays LV LOC WHV fault. |
| LV_LOC_WPFC_FAULT | No_Error/Error | Displays LV_LOC WPFC fault. |
| MAINS_HI_ERROR | No_Error/Error | Displays the power supply HI malfunction status. |
| MAINS_LO_ERROR | No_Error/Error | Displays the power supply LO malfunction status. |
| OBC_CVN_CALC_STAT | not calculating/Calculating CVN | Displays the CVN measurement status of the charging control unit. |
| OBC_DTC_CLEAR_REQ | nonRequestClear/RequestClear | Displays the DTC deletion request status of the charging control unit. |
| OBC_DTC_CLEAR_STAT | not complete/Complete | Displays the DTC deletion status of the charging control unit. |
| OBC_MODE | OFF/Standby/Ready/Charging/Fault state | Displays the charging control unit mode. |
| OUT_CUR_FAULT | No_Error/Error | Displays the output current malfunction status. |
| OUT_LIM_STAT | Normal/Limit | Displays the output restriction status. |
| PD_VOLT | V | Displays PD voltage. |
| PFC_CHIP_FAULT | No_Error/Error | Displays PFC CHIP fault. |
| PFC_LOC_WLV_FAULT | No_Error/Error | Displays PFC LOC WLV fault. |
| PFC_THERMAL_A_FAULT | No_Error/Error | Displays PFC thermal A fault. |
| PFC_THERMAL_B_FAULT | No_Error/Error | Displays PFC thermal B fault. |
| SHIFT_P_STAT | Parking/not-P | Displays the P position status. |
| TEST_12V_OVERVOLT_FAULT | No_Error/Error | Displays OBD2Test LV12V over voltage. |
| TEST_12V_UNDERVOLT_FAULT | No_Error/Error | Displays OBD2Test LV12V under voltage. |
| TEST_BATT_OVERVOLT_FAULT | No_Error/Error | Displays OBD2Test LVBatt over voltage. |
| TEST_BATT_UNDERVOLT_FAULT | No_Error/Error | Displays OBD2Test LVBatt under voltage. |
| TEST_CP_FAULT | No_Error/Error | Displays OBD2Test CP voltage. |
| TEST_DUTY_FAULT | No_Error/Error | Displays OBD2Test CP duty cycle. |
| TEST_FREQ_HI_FAULT | No_Error/Error | Displays OBD2Test CP frequency high. |
| TEST_FREQ_LO_FAULT | No_Error/Error | Displays OBD2Test CP frequency low. |
| TEST_HV_BIAS_FAULT | No_Error/Error | Displays OBD2Test HV bias fault. |
| TEST_P_BIAS_FAULT | No_Error/Error | Displays OBD2Test P bias fault. |
| TEST_PROX_OPEN_FAULT | No_Error/Error | Displays OBD2Test Prox open circuit. |
| TEST_PROX_SHRT_FAULT | No_Error/Error | Displays OBD2Test Prox short circuit. |
| TEST_TEMP_OORH_FAULT | No_Error/Error | Displays OBD2Test sensor reception temperature OORH. |
| TEST_TEMP_OORL_FAULT | No_Error/Error | Displays OBD2Test sensor reception temperature OORL. |
| TYPE | TYPE1/TYPE2 | Displays TYPE1 or TYPE2. |
| VOLT_CUR_SEN_CHECK_STAT | not checking/CheckingVoltCurrSensor | Displays the check status of the internal voltage/current sensor. |
| VPWR | V | Displays voltage at battery charge control module (onboard charger) power supply terminal. |
| WAKEUP_LOC_LV_FAULT | No_Error/Error | Displays wake up LOC LV fault. |
| WIRED_CONNECT_COUNTER | Counts | Displays the wired connection counter. |
| WIRED_CONNECT_STAT | Counts | Displays the wired connection status. |