Function Inspection: Notes
NOTE:
- Perform the procedure with the M-MDS connected to the DLC-2.
- Switch the ignition ON (engine off).
- Display PIDs [BOOST_PRES_ACT] and [BOOST_PRES_ACT_VOLT]. (Refer to PID/DATA MONITOR INSPECTION in the appropriate troubleshooting information )
- Compare the voltage and boost pressure indications for the PIDs [BOOST_PRES_ACT_VOLT] and [BOOST_PRES_ACT] with the standard in the table indicated below.
- If they do not match the standard, perform the voltage inspection. (See Voltage Inspection ).