Brake Fluid Replacement Note
WARNING: This page is about a different car, the 2024 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the bleeder cap on the brake caliper, and attach a vinyl tube to the bleeder screw.
- Place the other end of the vinyl tube in a clear container and fill the container with fluid during brake fluid replacement.NOTE:
- Replace the brake fluid from the brake pipe can be implemented quickly by slowly depressing the brake pedal.
- Working with two people, one should pump the brake pedal strongly and quickly several times, and then depress and hold the pedal down.
- While 1 technician depresses the brake pedal and another technician loosens the bleeder screw using a box-end wrench, drain any remaining fluid, and then retighten the bleeder screw.
- Repeat the procedure from Steps 3 and 4 until new fluid comes out of the vinyl hose.
- Perform brake fluid replacement as described in the above procedures for all brake calipers.