Total Toe-In Adjustment

WARNING: This page is about a different car, the 2025 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

Loosen the installation nut of the adjusting cam bolt.

Rotate the adjusting cam bolt in either direction to adjust the toe-in.

Courtesy of MAZDA MOTORS CORP.

TOTAL TOE-IN ADJUSTMENT

	Left wheel	Right wheel
Toe-out direction	Clockwise	Counterclockwise
Toe-in direction	Counterclockwise	Clockwise

NOTE: Refer to the following figure to adjust the angle of the adjusting cam bolts in single increments.

REAR SUSPENSION VEHICLE-SIDE CAM BOLT ADJUSTMENT TABLE

Scale	Linkmovementamount (mm{IN})	Toe anglechange	Camberanglechange
1	0.24{0.0094}	0°04'	0°01'
2	0.94{0.037}	0°16'	0°02'
3	2.05{0.0807}	0°34'	005'
4	3.50{0.138}	0°58'	0°08'
5	5.19{0.204}	1°26'	0°12'
6	7.00{0.276}	1°56'	0°16'

Tighten the nut.
Tightening torque

84-101 N.m {8.6-10 kgf.m, 62-74 ft.lbf}