Required Procedure After Negative Battery Terminal Disconnection/Connection

WARNING: This page is about a different car, the 2024 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.

System name

Conditions after disconnecting the negative battery terminal

Required procedure

Reference

Before disconnecting negative battery terminal

After connecting negative battery terminal

i-stop system (vehicle with i-stop)

Specified information in the PCM cleared and the i-stop does not operate normally.

Perform battery condition initial setting (i-stop setting).⁽¹⁾

(See BATTERY CONDITION INITIALIZATION SETTING (i-stop SETTING) .)

Power liftgate (PLG) system

Fully close the liftgate manually.

(See POWER LIFTGATE (PLG) INITIALIZATION PROCEDURE .)

Sunroof system

Initial settings are reset, and operations are disabled.

Perform the initial settings of the sunroof system.

(See SUNROOF SYSTEM INITIALIZATION PROCEDURE .)

⁽¹⁾	For vehicles with i-stop, if the negative battery terminal is disconnected and re-connected, battery condition initial setting (i-stop setting) must be performed.