LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2025 >> CX-5 S Select >> Repair and Diagnosis >> External Pages >> Different car >> Section 240 (Lighting System) >> Auto Leveling Control Module Removal/Installation >> Remove Driver Monitoring Camera Unit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Remove Driver Monitoring Camera Unit

WARNING: This page is about a different car, the 2024 Mazda CX-90. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Depending on the condition of the vehicle, it may not be possible to transfer the driver monitoring camera unit data before replacement. If the driver monitoring camera unit data cannot be transferred, the driver information stored in the driver monitoring camera unit is deleted. When replacing the driver monitoring camera unit, explain to the customer that it is necessary to reset the driver information before replacement.
  1. Remove using the procedure shown in the figure.
    Fig 1: Driver Monitoring Camera Unit, Clip, Connector And Bolts With Torque Specification
    G16710322Courtesy of MAZDA MOTORS CORP.
TIGHTENING TORQUE SPECIFICATION

Step Part name
1 Connector -
2 Clip -
3 Bolt 11 N.m {110 kgf.cm, 95 in.lbf}
4 Driver monitoring camera unit -