Front Map Light Inspection
WARNING: This page is about a different car, the 2024 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- The integrity of the front map light cannot be determined from a single part. When inspecting the front map light, perform the following procedure.
- Operate the front map light switch and verify that the front map light turns on.
If front map light turns on:
- The front map light is normal therefore the inspection is completed.
If front map light does not turn on:
- Go to the next step.
- Perform the DTC inspection for the BCM. (Refer to DTC INSPECTION
.)
)
If DTCs are detected:
- Repair the malfunctioning location according to the applicable DTC troubleshooting. (Refer to DTC TABLE [BCM] .) )
If DTCs are not detected:
- Replace the front map light because there is a malfunction in the front map light. (See FRONT MAP LIGHT REMOVAL/INSTALLATION .)