LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2025 >> CX-5 S >> Repair and Diagnosis >> Brakes >> Traction Control >> On-Board Diagnostic - Dynamic Stability Control >> DTC U0336:00 Signal Error From SAS Control Module >> Diagnostic Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Procedure

DTC U0336:00 (DSC HU/CM) DIAGNOSTIC PROCEDURE

Step Inspection Results Action
1 VERIFY SAS CONTROL MODULE DTC  Yes Go to applicable DTC inspection. (See DTC TABLE [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM - US/CANADA SPEC.)] .)
DTC troubleshooting completed, then go to the next step.
No Go to the next step.
2 VERIFY DTC TROUBLESHOOTING COMPLETED 
  • Using the M-MDS, clear the DTC from the DSC HU/CM. (See CLEARING DTC .)
  • Using the M-MDS, perform the DSC HU/CM DTC inspection. (See DTC INSPECTION .)
  • Is the same Pending DTC present?
 Yes Repeat the inspection from Step 1
If the malfunction recurs, replace the SAS control module, then go to the next step (See SAS CONTROL MODULE REMOVAL/INSTALLATION [TWO-STEP DEPLOYMENT CONTROL SYSTEM - US/CANADA SPEC.] .)
No Go to the next step.
3 VERIFY NO DTC IS PRESENT 
  • Are any DTCs present?
 Yes Go to applicable DTC inspection. (See DTC TABLE .)
No DTC troubleshooting completed.
scientia non olet · About LEMON Manuals