LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2025 >> CX-5 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 247 (Cruise Control System) >> Cruise Control Switch Removal/Installation >> Remove Driver Side Air Bag Module >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Remove Driver Side Air Bag Module: Notes

WARNING: This page is about a different car, the 2024 Mazda CX-90. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • Handling the driver side air bag module improperly can accidentally operate (deploy) the air bag, which may seriously injure you. Read the SRS air bag system service warnings and cautions before handling the air bag module.
NOTE:
  • The driver side air bag module is engaged by the pins of the driver side air bag module and the snap springs of the steering wheel.
G16706859Courtesy of MAZDA MOTORS CORP.
  1. Remove using the procedure shown in the figure.
G16706860Courtesy of MAZDA MOTORS CORP.
PART NAME DESCRIPTION

Step Part name Applicable condition
1 Driver side air bag module
(See DRIVER SIDE AIR BAG MODULE REMOVAL NOTE )
-
2 Horn switch connector -
3 Air bag module connector
(See AIR BAG MODULE CONNECTOR DISCONNECTION NOTE )
Standard deployment control system
4 Air bag module connector
(See AIR BAG MODULE CONNECTOR DISCONNECTION NOTE )
Two-step deployment control system