All Models
Place wheels in straight-ahead position. If toe-in is not to specifications, adjust by loosening locknuts on outer steering links and rotating links to obtain specified toe-in. Make sure steering links (tie-rods) are adjusted equally.
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Caster (Degrees) | Camber (Degrees) | Toe-In (Inches) | Toe-Out On Turns (Degrees) | |
|---|---|---|---|---|---|
| Inner | Outer | ||||
| 230, 240 & 280 Series | 3 2/3±1/3 | 1/6±1/4 | 1/4 to 7/12 | .... | .... |
| 450SL & SLC | 3 2/3±1/3 | -1/12±1/4 | 1/6 to 1/2 | .... | .... |
| 450SE & SEL | 10±1/2 | -1/16±1/6 | 1/4 to 7/12 | .... | .... |