All Models
Place wheels in straight-ahead position. If toe-in is not to specifications, adjust by loosening locknuts on outer steering links and rotating links to obtain specified toe-in. Make sure steering links (tie-rods) are adjusted equally.
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Caster (Degrees) | Camber (Degrees) | Toe-In (Inches) | Toe-Out On Turns (Degrees) | |||
|---|---|---|---|---|---|---|---|
| Inner | Outer | ||||||
| 230, 240, 280 & 300 Series | (1)3 2/3 ± 1/3 | 1/6 ± 1/4 | 5/4 to 5/32 | ||||
| 450 SE & SEL | 10 ± 1/2 | - 1/6 ± 1/6 | 5/64 tO 5/32 | ||||
| 450 SL & SLC | 3 2/3 ± 1/3 | - 1/12 ± 1/4 | 3/64 to 1/8 | ||||
|
|||||||