LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 1996 >> C220 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - HFM-SFI System >> Programming >> Resetting & Reactivating Engine Control Module Memory
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Resetting & Reactivating Engine Control Module Memory

NOTE: Control modules manufactured by Bosch up to 8/93, the start button must be pressed 5-6 seconds to clear the DTC memory and 8-9 seconds to reset and reactivate the engine control module memory.
  1. Clear diagnostic trouble code (DTC) memory. See .
  2. After the number "1" appears, press the start button for 6-8 seconds.
  3. Switch ignition OFF and wait minimum of 2 seconds.
  4. Turn ignition ON, wait a minimum of 10 seconds and then start engine.
scientia non olet · About LEMON Manuals