LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 1996 >> C280 >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Wheel Alignment Specifications & Procedures) >> Wheel Alignment Procedures >> Performing Alignment Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Performing Alignment Procedure

WARNING: This page is about a different car, the 1996 Mercedes-Benz C220 and 1995 Mercedes-Benz C220. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drive vehicle onto electronic alignment system. Unlock rotary and sliding plates. Install brake pedal winch on brake pedal. Attach measuring headed to each wheel. Perform initial measurement. Check vehicle level at front and rear axle and adjust as necessary.
  2. Check ball point position. Check and adjust toe-in at rear axle. Check and adjust caster and camber at front axle. Check and adjust toe-in at front axle. Remove measuring heads and brake pedal winch. Test drive vehicle.
scientia non olet · About LEMON Manuals