LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 1997 >> SL500 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Entry System >> System Tests >> Test 19: RCL Control Module Output Circuit SN1 (All Except SL320 & SL500)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test 19: RCL Control Module Output Circuit SN1 (All Except SL320 & SL500)

  1. Connect adapter harness and breakout box to RCL control module. Ensure all doors are closed and locked. Measure voltage between terminals No. 11 and 27 at breakout box. Battery voltage should exist. If voltage is as specified, go to next step. If voltage is not as specified, perform TEST 1  under SYSTEM TESTS. Check RCL control module.
  2. Unlock vehicle by pointing remote transmitter at left front door receiver and depressing transmitter button. Voltage should be less than one volt and Green indicator lights should blink. If voltage is as specified and Green indicator lights blink, go to next step. If voltage is not as specified and Green indicator lights do not blink, perform TESTS 1, 3 and 6 under SYSTEM TESTS. Check left front door receiver. Check RCL control module.
  3. Unlock vehicle by pointing remote transmitter at right front door receiver (if equipped) and depressing transmitter button. Voltage should be less than one volt and Green indicator lights should blink. If voltage is as specified and Green indicator lights blink, go to next step. If voltage is not as specified and Green indicator lights do not blink, perform TESTS 1, 11 and 14 under SYSTEM TESTS. Check right front door receiver. Check RCL control module.
  4. Unlock vehicle by pointing remote transmitter at trunk lid receiver and depressing transmitter button. Voltage should be less than one volt and Green indicator lights should blink. If voltage is as specified and Green indicator lights blink, go to next step. If voltage is not as specified and Green indicator lights do not blink, perform TESTS 1, 7 and 10 under SYSTEM TESTS. Check trunk lid receiver. Check RCL control module.
  5. Unlock vehicle by pointing remote transmitter at interior rear view mirror receiver (if equipped) and depressing transmitter button. Voltage should be less than one volt and Green indicator lights should blink. If voltage is as specified and Green indicator lights blink, RCL control module output circuit SN1 is okay at this time. If voltage is not as specified and Green indicator lights do not blink, perform TESTS 1, 2, 15 and 18 under SYSTEM TESTS. Check interior rear view mirror receiver. Check DAS and RCL control module.
scientia non olet · About LEMON Manuals