Using Hand Held Tester

WARNING: This page is about a different car, the 1996 Mercedes-Benz SL320, 1996 Mercedes-Benz S320, 1996 Mercedes-Benz E320, 1995 Mercedes-Benz S320, and 1994 Mercedes-Benz S320. However, it is still accessible from the selected car via links, so may be relevant.

Connect Hand Held Tester to Data Link Connector (X11/4) according to connection diagram. See Fig 1 and/or Figure . The following functions can be performed according to the instructions on the hand held tester display:

Retrieving/Erasing DTC Memory
Reading Actual Values
Performing Activations
Programming Control Modules

Fig 1: Scan Tool Connection Diagrams

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Identifying Hand Held Tester Special Tools

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.