Synchronization Of Transmitter Keys
NOTE:
If transmitter battery has been replaced it may be necessary to resynchronize a transmitter key .
In order to synchronize transmitter keys, perform following steps:
- Insert transmitter into ignition lock.
- Test to see if transmitter key has been recognized as a valid (ATA status indicator lamp [E33] blinks).
- Remove transmitter key from ignition lock.
- Then within 1 minute, do the following:
- Press and hold OPEN button and at same time press "CLOSE ALL" button (5) times.
- Press function buttons as necessary.
- Only after completed synchronization process is Remote Function of transmitter possible.