Electronic Traction System Adaptation
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 1996 Mercedes-Benz SL320, 1996 Mercedes-Benz C36, 1996 Mercedes-Benz C280, 1995 Mercedes-Benz SL320, and 1995 Mercedes-Benz E320. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If the CC/ISC control module (N4/3) is replaced, or if a control module from another vehicle is temporarily installed, the ETS adaptation must be activated. Thereby allowing the CC/ISC control module to adapt to the vehicle configuration.
- Turn ignition on.
- Wait 3 seconds
- Start engine.
- Wait 7 seconds.
- Turn ignition off
- Turn ignition on.