Removal & Installation (E Class)
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 1999 Mercedes-Benz SLK230, 1999 Mercedes-Benz SL500, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, and 1999 Mercedes-Benz S320. However, it is still accessible from the selected car via links, so may be relevant.
- Before proceeding, see SERVICE PRECAUTIONS . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM . Remove ignition key. Remove gear shift cover panel. Remove ashtray and ashtray housing at front of console. Remove radio (if necessary).
- Remove center console right side cover screws and right side cover. Disconnect electrical connector for control module. Remove 2 control module mounting screws. Remove control module.
- To install, reverse removal procedure. Ensure SRS control module arrow points to front of vehicle. Set parameters and program new SRS control module with Hand-Held Tester (965 589 00 01 00). Activate air bag system. Perform system operation check to ensure system is functioning properly. See SYSTEM OPERATION CHECK .