Safety Circuit
WARNING: This page is about a different car, the 1996 Mercedes-Benz E320, 1996 Mercedes-Benz E300, 1995 Mercedes-Benz E420, 1995 Mercedes-Benz E320, and 1995 Mercedes-Benz E300. However, it is still accessible from the selected car via links, so may be relevant.
Recognizes faulty signals inside and outside electronic control unit. Safety circuit intervenes in control sequence during extreme driving conditions, such as hydroplaning. When fault is recognized, system is switched off. The condition is indicated to driver by illumination of a warning light.
The safety circuit continuously monitors battery voltage. If voltage is less than specified requirements, system is switched off until voltage is within specified range. Safety circuit also includes active test cycle section or BITE (Built-In Test Equipment).