Electric vent window, function - GF67.39-P-1000GH

MODEL 163 with CODE (848) Electric vent window 

Function prerequisites 

• Voltage not too low or too high
• Switch on conditions for convenience control fulfilled

Function 

The left and right rear side windows can be infinitely adjusted electrically with the left vent window switch (S21/13) and right vent window switch (S21/14)  located in the switch panel in the middle of the instrument panel.

The hinges for the side windows are fastened to the C-pillars. Adjustment of the side windows is accomplished by the left rear vent window motor (M21/8) and right rear vent window motor (M21/9) located in the D-pillars at one half the height of the windows. 

The maximum extension is 35 mm.

The motors are actuated when the corresponding switch is switched directly and circuit 30 is switched via the convenience relay (F1k14). The convenience relay (F1k14) is controlled by the all-activity module (AAM, N10).