Code-related storage block selection - GF91.29-P-3004R

MODEL 230

Function

The driver seat position is stored in the left front seat adjustment with memory control module (N32/1) (RHS model: right front seat adjustment with memory control module (N32/2)) on a key-related basis.

The EIS control module (N73) converts the key rail that is currently in use into a storage block number. If key dependency is enabled, there is a standard assignment between the key rail and the memory block number as per the following list. This is transmitted cyclically over the interior CAN .

If key-dependency is switched off in the instrument cluster (A1) , all the settings are assigned to memory block number 3.

If the key-dependency is switched off, the EIS control module (N73) transmits only the memory block number 3 .

Key-dependency in the instrument cluster (A1) : ON Key rail:

1 2 3-8

Memory block number from EIS control module (N73)

1 2 3

Memory switch (S91/2s9) of left seat adjustment switch group (S91/2); or memory switch (S92/2s9) of right seat adjustment switch group (S92/2) is output by the relevant left door control module (N69/1) or right door control module (N69/2) :

1 2 3 1 2 3 1 2 3

Memory area in relevant (LHS / RHS) left front seat adjustment with memory control module (N32/1) or right front seat adjustment with memory control module (N32/2)

1 2 3 4 5 6 7 8 9

The following settings are put into key-dependent storage if this has been activated:

Driver's seat position
Steering column position
Outside rearview mirror position
Mirror park position
Air conditioning settings
Settings in instrument cluster

	Left front seat adjustment control module with memory location/task		GF91.29-P-2106R
	Right front seat adjustment with memory control module, location/task		GF91.29-P-2107R
	Left front door control module, location/task/ design		GF72.29-P-4113R
	Right front door control module, location/task/ design		GF72.29-P-4114R
	Front seat adjustment switch train, location/ design/function		GF91.29-P-2100R